Crusher Cone Fire Pit

Crusher Cone Fire Pit Parameter：

Introduction

Crusher cone fire pit is suitable for medium and fine crushing of various ores, capable of handling medium and harder materials, with large crushing ratio, high efficiency, low energy consumption and complete equipment models.

Crusher Cone Fire Pit Working Principle

Crusher Cone Fire Pit adopts the principle of laminated crushing for operation, mainly the motor drives the above eccentric sleeve to rotate through the middle transmission device, and the moving cone swings to do gyratory movement in the crushing cavity, and various materials poured in from above can be squeezed and crushed in the crushing cavity with the swing of the moving cone, which will form the required size of particles.

When the crushing cavity falls into the metal block and other unbreakable objects, the single-cylinder moving cone is held up by the bottom hydraulic piston, which plays the role of discharge port adjustment and over-iron protection, repeatedly lifting and dropping to exclude the blockage of ore.

Application Areas

Crusher cone fire pit is suitable for raw materials in metallurgy, construction, road building, chemical and silicate industries, it can crush materials with high hardness such as river pebbles, granite, basalt, iron ore, etc.

Packaging and transportation

Standard parts are packed in wooden boxes, large parts are packed in plastic film, and the whole machine is packed in containers.

Performance introduction

Crusher cone fire pit is referred to as cone crusher, currently it can be divided into single-cylinder hydraulic cone crusher, compound hydraulic cone crusher (also known as Simmons cone crusher), full hydraulic cone crusher, multi-cylinder hydraulic cone crusher, etc. according to the structure. It is used to crush various ores and rocks with medium and above medium hardness (below 350 MPa), such as calcite, limestone, granite, river pebbles, dolomite, lime stone, etc. Its performance advantages are as follows.

1.Full-automatic intelligent control PLC system, coupled with touch screen control mode, but the operator can monitor the temperature, current and capacity of the equipment in real time, and effectively monitor the operation of the equipment.

2. After upgrading and optimizing the low-pressure crushing cavity, the production efficiency of the whole equipment is greatly improved again.

3. Free to adjust the crushing cavity type, lower crushing costs, simple maintenance of equipment, excellent grain shape of the finished material.

4. Change the cone break mouth and application range is very wide, on limestone, granite, river pebbles and other boring processing effect is very good, received many users like.

FAQ

1.What is the measurement standard when adjusting the discharge opening of cone crusher?

There are measurement criteria, the size of the discharge opening depends on the required product size. When adjusting the adjustment sleeve, the gap between the closed edge and the crushing liner should be slightly smaller than the required product size, and the adjustment sleeve can also be used to compensate for the wear of the crushing wall and the rolling molar wall, so as to ensure the product size.

2. How to adjust the discharge size of cone crusher?

At present, the size of discharge can be adjusted in many ways, because it is divided into five categories: spring cone crusher, compound cone crusher, full hydraulic cone crusher, multi-cylinder hydraulic cone crusher, single-cylinder hydraulic cone crusher, etc. There are certain differences in the structure of each type, and there are also differences in the width of discharge opening and adjustment methods, as follows.

The size of the Crusher Cone Fire Pit discharge opening changes with the lifting and lowering of the adjusting sleeve in the support sleeve. When the adjusting sleeve rotates clockwise, the discharge opening decreases; when it rotates counterclockwise, the adjusting sleeve rises and the discharge opening increases.

（1）The spring and compound cone breakers adjust the size of discharge opening by manually tightening the adjusting cap so that the distance between the molar wall and the crushing wall is reduced, and the adjustment range of discharge opening is 3-51mm.

（2）All-hydraulic cone crusher has a discharge opening adjustment range of 3-64mm, and multi-cylinder hydraulic cone crusher has a discharge opening adjustment range of 5-51mm, both rely on pushing cylinder to adjust the size of discharge opening, only the degree of automation is different.

（3）Single-cylinder cone crusher discharge opening adjustment range 4-41mm, the size of the discharge opening is adjusted by the lift of the crushing wall driven by the hydraulic cylinder at the bottom of the machine.

Company Profile

The company is located in Henan Province, on the edge of the Yellow River, and has mature R&D capabilities. Among them, the engineering stone crushing production line and the construction sand production line are at the industry level. The business and service organizations are all over the country, and the equipment is exported to Africa, Southeast Asia and other countries. 

Over the years, with the unique management level and manufacturing technology, rich manufacturing experience and customer-first service spirit, we have produced qualified products and won the trust of users with good comprehensive benefits.

Why choose us?

• Our Cone Crushers are engineered to provide superior performance and maximum reliability.
• We have long adhered to the policy of "quality first, reputation first" to provide customers with high-quality Crusher Cone Fire Pit.
• Our manufacturer specializes in producing high-quality Cone Crushers at competitive prices.
• While our company is developing rapidly, we are also constantly accelerating the introduction of talents and improving core competitiveness. Now we have an experienced management team and strive to provide customers with better products and services.
• At our factory, we produce only the finest quality Cone Crushers, built to last and provide exceptional performance.
• Having a good customer service system and excellent customer service system management team is the foothold we dare to guarantee.
• We are a reliable manufacturer of Cone Crushers with years of experience and a reputation for quality.
• In the process of dealing with customers, we have always tried our best to be responsible, transparent and meticulous in our work, and strive to establish a good image of integrity.
• Our company takes pride in our Cone Crushers, which are designed and built to the highest standards of quality and performance.
• High technology is changing our work and life. We are willing to provide high-quality products for our customers with never-ending pace and persistent enterprising spirit.

Hot Tags: crusher cone fire pit, China crusher cone fire pit manufacturers, Cone Stone Crusher, hydraulic stone crusher, sand stone crusher, parker jaw crusher, rock hammer mill, Fine Stone Cone Crusher