Jaw Crusher Plant

Jaw Crusher Plant Parameter：

Introduction

Jaw Crusher Plant is referred to as jaw crusher because of its simple structure, sturdiness, reliable operation, easy maintenance and overhaul, and relatively low production and construction costs. Therefore, it is still widely used in metallurgy, chemical industry, building materials, electric power, transportation and other industries until now. It is used for coarse, medium and fine crushing of various ores and rocks with a compressive strength of 147-245MPa.

Jaw Crusher Plant are mainly used for medium-sized crushing of various ores and bulk materials, and are widely used in mining, smelting, building materials, highways, railways, water conservancy and chemical industries. The compressive strength of the crushed material does not exceed 320Mpa.

Application

Metallurgy, mining, chemical sand and gravel yard, mining, coal mining, chemical concrete mixing station and other industrial sectors.

Product advantages

1. Low noise and less dust.

Increase the sealing of the crushing chamber, and install dust collectors and noise suppressors to reduce dust and noise on the job site.

2. The crushing ratio is large and the particle size is uniform.

The filling degree of the crushing cavity is good, the loaded material blocks are uniformly crushed, and the lower end of the movable jaw is forced to push out the finished product for unloading, so the productivity is high.

3. Simple structure and reliable work.

The use of hydraulic safety device not only increases the reliability and safety of equipment operation, but also reminds the operator that the equipment has failed, which is conducive to eliminating operating faults, adjusting the equipment to a good state in time, and continuing to put it into production

Features

1.The crushing ratio is large. The particle size of the Jaw Crusher Plant is uniform, the crushing cavity is deep and there is no dead zone, which improves the feeding capacity and output.

2. Simple structure. Reliable work, low operating cost, and wide adjustment range of the discharge port can meet the requirements of different users.

3. Equipment energy saving. The energy saving of a single machine is 15% to 30%, and the energy saving of the system is more than doubled.

FAQ

1.How to maintain and use jaw crusher?

1. After the crusher is in normal operation, the material can be fed.

2. The material to be crushed should be evenly added into the crushing cavity, and side feeding should be avoided to prevent sudden load or unilateral sudden increase.

3. Under normal working conditions, the temperature rise of the bearing should not exceed 35 °C, and the maximum temperature should not exceed 70 °C, otherwise it should be stopped immediately, and the cause should be identified and eliminated.

4. Before stopping, the feeding should be stopped first, and the motor can be turned off after the crushed material in the crushing chamber is completely emptied.

2.Jaw crusher lubrication

(1) Regular attention and timely lubrication of the friction surface can ensure the normal operation of the machine and prolong its service life.

(2) The lubricating grease used in the Jaw Crusher Plant should be determined according to the location of use and the temperature conditions. Generally, calcium-based, sodium-based and calcium-sodium-based greases are used.

(3) The grease added to the bearing seat is about 50% of its space volume, and is replaced every 3 to 6 months. When changing the oil, clean the raceway of the roller bearing with clean gasoline or kerosene.

(4) Before the product starts, an appropriate amount of grease should be injected between the thrust plate and the thrust plate support.

Our company

Zhongxiang Machinery Co., Ltd. is located in Zhengzhou City, Henan Province. It is a modern enterprise integrating scientific research, development, manufacturing, sales and export.

Service tenet: We adhere to the tenet of being honest, doing things according to rules, pioneering and innovating, mutual benefit and win-win, and sincerely treat every customer.

Why choose us?

• Our Jaw Crusher products are manufactured using high-grade materials for maximum durability.
• Our company represents a better level in the Jaw Crusher Plant industry in terms of production scale and technical strength.
• We are passionate about delivering the best Jaw Crusher products and services to our customers.
• We have always followed the concept of providing excellent service to our customers by finding and developing better Jaw Crusher Plant for them.
• We provide Jaw Crusher products that are ideal for a wide range of crushing applications.
• Our employees have solid theoretical foundation and professional knowledge, enough enthusiasm and passion to devote themselves to their work.
• We are committed to providing our customers with prompt and reliable Jaw Crusher services.
• Our company has done a good job in financing, mergers and acquisitions, talent team incentives, etc., cultivating new industrial momentum, and promoting the rapid development of the company.
• We offer Jaw Crusher products that are reliable, efficient, and long-lasting.
• Our employees can not only create enterprise value, but also improve their own value. They can work happily every day.

Hot Tags: jaw crusher plant, China jaw crusher plant manufacturers, jaw crusher alibaba, double rotor impact crusher, crusher shaft, 150 tph stone crusher, Cone Crusher, double toothed roll crusher