At present, wood shredder is a very important industry in my country's industrial development field. Now with the continuous development and progress of machinery, the competitiveness of the sawdust shredder industry is relatively fierce. Then a customer recently asked that the wood in his place has a lot of moisture. If the wood with high humidity is directly crushed, what effect will it have on the machine?
First of all, let's talk about it first. Before starting the wood shredder, we need to make sure whether the chassis is stable. If the circuit connection is normal, it can start normally. After starting, let the machine idle for a while and observe the sound of the shredder starting. Is it normal and so on.
After the sawdust grinder runs normally, you can slowly start feeding. When feeding, you should also pay attention to the stability and balance of the feeding speed. The feeding speed is determined according to the size and dryness of the wood block.
For example, when the humidity of the wood is relatively high, the feeding speed should be slowed down a little, but in daily life, we recommend choosing dry wood pulverization for the feeding, so that the pulverized effect will be better. Wood with high humidity is also easy to cause rust inside the grinder, which is detrimental to the life of the grinder in the long run.
In addition to smashing wood with high humidity, the wood should also be careful not to contain impurities such as iron blocks and stones, otherwise it will cause certain damage to the chips and hammer drying nets of the wood powder machine. When we buy a machine and go home, it is natural that the more worry and effort, the better, so the basic things like these must be done well, so as to ensure that the shredder can run for a long time.
