The power of the wood shredder is divided into two types: diesel engine and motor, but no matter which driving force is used in rainy weather, we must do a good job of waterproofing to prevent the rainwater from entering the driving force and the inside of the fuselage, which will affect the The second is to give the wood shredder a buffer time before starting each time, which can improve the overall service life of the wood shredder.
wood shredder
The wood shredder is mainly composed of three parts: the body, the middle body and the lower body. The main engine adopts the alloy cutter head with high wear resistance, and the motor drives the high-speed operation of the shredder bearing so that high-speed airflow is generated inside the machine, and the material is processed at a high speed. Strong impact, compression and cutting to achieve the purpose of crushing.
The daily maintenance of the wood shredder includes the following points:
1. The feeding of the wood shredder should be uniform. If there is noise, the temperature of the bearing and the body is too high, or the material is sprayed outward, it should be stopped immediately to check and remove the fault;
2. Do a good job in circuit inspection to avoid the occurrence of leakage faults;
3. After 300 hours of operation of the wood shredder, the bearings must be cleaned and the oil should be replaced; when the oil is installed, it is better to take 1/3 of the gap of the full bearing seat and not exceed 1/2;
4. Carefully check the materials to prevent metal, stones and other hard objects from entering the crushing chamber and causing failure;
5. Do not replace the pulley frequently to prevent the speed from being too high or too low.
