The raw material of sawdust wood briquette machine is sawdust, crop straw, wood branches, rice hull, bamboo sawdust, peanut shell, sunflower shell, furfural dregs, cotton stalks, corn stalks, sesame straw, corncob and shrubs broken branches.maize stalks, soybean stalks, broomcorn stalks, cotton stalks, rape stalks, peanut plants, sunflower stalks, bamboo sawdust, bagasse , wood chips , coffee husk, coir pith, jute sticks, Bamboo, wood, straw dust, Mustard stalk and cotton stalks ,nutshell, cocon and so on.
After the materials are crushed, they are dried and then shaped with a billet forming machine and then subjected to a carburizing treatment. The main equipments are: crusher, dryer, sawdust briquette making machine and carbonization furnace are produced with equipment arrangement.
Crusher: The raw materials are crushed into granules within 10mm by wood crusher.
Drying machine: it can automatically discharge the material and dry it again, the exhaust port does not cross the material, and the discharging port does not spray the material to fall naturally.It can be produced by four bar machines.
Sawdust briquette making machine: The density can be adjusted at any time. This technology not only guarantees the quality of products. Branches, leaves, sawdust and other agricultural raw materials are crushed, pressed and condensed, and because they can replace traditional charcoal, it is called "straw charcoal".
Carbonization Furnace: The fuel rods are carbonized and shaped from the rod making machine.
From raw material source to fuel use, the process is: material recovery → crushing → drying → automatic demineralization of feeding → billet making → carbonization → ejection → cooling → conveying → civil and small boilers → biomass power plant.
It is used in the compression molding of various biomass raw materials, with low energy consumption and high production efficiency
Change the old-fashioned movement bearing from 3 to 4, which increases the durability and stability of the machine.
Change the old-fashioned oil-coated lubrication to oil-immersed lubrication. As long as there is no shortage of oil, it can be used for many years
Increase the screw pitch and increase the amount of feed material, thereby greatly increasing the output
The structure of the forming cylinder is improved, the friction between the machine and the raw material is reduced, and the density of the mandrel is increased
Raw material Requirement:
1. length:3-5mm ;diameter ≤3 mm
2. Raw material humidity within 8-12%.
If moisture>12% may need dryer,We have air flow dryer and drum dryer.
If material size >5mm will need hammer mill or wood crusher.
Final product :
1The available shape of sawdust wood briquette machine: square, hexagonal, hexagon with edge.
2The available diameter could be: 50mm,60mm,80mm.
3.Length could be: 20cm,30cm, 40cm, 50cm
4.Gravity: 1300—1900kg/m³ Calorific value: 4500-5000kcal/kg.
This equipment is the main molding equipment for the production of machine-made charcoal. Bamboo, wood, fruit shell, straw and other granular waste materials with a moisture content is less than 12% , length is not greater than 5mm and a diameter is not greater than 3mm are extruded into a solid mandrel with a central hole through a high temperature and high pressure process without adding any adhesive.The charcoal machine production site needs to be more than 50 square meters and the height is more than 4 meters
