In order to make the coal skewer machine last longer, and the application price is the highest, you should pay attention to some achievements in the process of using the coal skewer machine or Xu Yiyang, let’s talk about it:
Before the test machine, the smooth positions should be brightened and smooth, and the amount of oil should be moderate. Check whether all nuts are loose, and tighten them. Click on the effector and check if there is any foreign body or abnormal sound. All confirmations are correct before starting up and running. And check whether the energy location is accurate.
1: Before starting each shift, check whether the rotation position is sensitive, whether there is any abnormal noise, and the machine can be put into consumption after running for ~ seconds.
2: The raw material must be resolved, the maximum particle size is less than mm, add water, add binder, curing agent, can be used before the time of mixing and retting.
3: When the feed opening is blocked, use single wood or bamboo strips for dredging. Never use non-metal rods.
4: The bearing of the tool rotation position should be filled with lubricating oil regularly, and the bearing position measurement does not exceed the degree.
5: Stop unloading before stopping the machine, stop the machine after the contents in the cylinder are emptied, assemble the machine head, reinstall it after washing, and prepare it for work.
6: In order to prevent the generator from overloading, it is recommended that the user install a DC voltmeter to adjust the material and water content according to the DC meter.
