In the production process of the rod making machine, if the raw material is large, it can be equipped with a pulverizer, and if the raw material moisture is too large, it can be equipped with a dryer. Moisture within % enters the rod making machine through high temperature and high pressure to make it into a rod shape (without adding any additives), and then put it into the carbonization furnace for carbonization, that is, charcoal.
The production process of the rod making machine: material crushing, drying, rod forming, carbonization. Reasonable design, reliable manufacturing quality, simple structure, convenient operation, small size, small footprint, labor-saving, power-saving characteristics; the designed fully automatic control electric heating device can randomly adjust the dry and humidity of the material to ensure the discharge molding It is stable and improves work efficiency; the main parts of the rod making machine are made of wear-resistant materials and are specially treated, so it can be continuously pressed for production and durable; it is suitable for pressing and molding of various biomass raw materials, with low energy consumption and high production efficiency; The three bearings of the old-fashioned movement are four, which increases the stability and durability of the machine; the old-fashioned oil lubrication is changed to oil-immersed lubrication, as long as there is no shortage of oil, it can be used for many years; increase the thread pitch to increase the amount of feed , thereby greatly increasing the output; improving the structure of the forming cylinder, reducing the friction between the machine and the raw material, and increasing the density of the mandrel.
The raw materials for the production of charcoal are extensive, cheap, inexhaustible, and inexhaustible, and some raw materials do not even need to spend money. With automatic control technology, wastes such as sawdust, peanut husks, rice husks, corn stalks, corn cobs, wine dregs and bagasse are pressed into round, hexagonal or octagonal intermediate belts through drying and high temperature and high pressure processes. round-hole charcoal, and then put it in a carbonization furnace or a homemade earth kiln to make black mechanical charcoal by dry distillation.
