The grain dryer is used for drying grain crops such as wheat, corn, rice, beans and so on. Users can choose dryers of different capacities according to the scale of agricultural production and the amount of grain drying.
The material feed into the drum from the hopper before the machine is started, and then turn clockwise the switch, the machine rotates clockwise to dry, after about 20-30 minutes(depends on the humidity of material), turn counterclockwise the switch and the machine rotates counterclockwise to discharge the material(Refer to the videos)and automatic separation, cleaning the dryer is very convenient and thorough , and will not be leave any residual seeds, especially suitable for drying grain seeds.
During the drying process of materials, there are hot air flow and radiant heat energy. Hot air drying means that the hot air flow moves forward from the tail to fully contact the material. Through heat conduction, the radiant heat energy is fully utilized, and the heat energy is fully transferred to the material to make the material The water in the cylinder is continuously evaporated, and the air-inducing device at the discharge port draws out a large amount of water and humidity to prevent secondary pollution caused by dust discharge.
The performance characteristics of the grain dryer: The grain discharge device of the grain dryer adopts a sliding valve structure, which does not damage the material during operation, and the grain discharge speed can be adjusted by frequency conversion according to the output and water removal requirements to meet the needs , based on the requirements of the seeds or commercial grain, the drying speed can be adjust to meet the quality requirements.
The drum dryer can use coal, rice husk or straw as fuel, and convert it into clean hot air through combustion and heat exchange, which does not pollute the dried grain. You can also use electricity and gas as a heating source
In addition, it can also be equipped with automatic online temperature and humidity measurement devices.
The operation is simple, just press the forward and reverse switch, and the motor drives the drum to turn, and the material will automatically come out of the pot, which is convenient and fast.
Large processing capacity, simple operation, one-key start, adjustable temperature.
