The coal rod machine is a machine that makes powdered raw coal into strips of different shapes. Its working principle is: the electric motor transmits the power to the transmission through the V-belt, and the transmission output shaft transmits the power to the propulsion shaft through the floating coupling.
The head of the coal stick machine is connected with the cylinder body with a snap ring structure and a bolt structure, which can be customized according to the needs of users，It uses the principle of spiral extrusion , which extrude the coal or charcoal powder material into various shapes，its shapes can be certain shape, like cylindrical , hexagon or plum flower rods with high intensity and strength.the machine can be customized with different mold,it can make different finished product and change easily.
The briquette extruder is a main equipment in the complete set of equipment for the fuel forming section in the gas production system of the ammonia fertilizer plant and the gas plant. It extrudes the fuel pulverized coal into circular (or hexagonal or square) ) coal rods, a new process that enters the gas-making furnace to replace the traditional process of burning lump coal to make gas. The use of coal rod machine to make coal rods can make full use of pulverized coal, no need to add lime in the production process, reduce the cost of fuel, and increase the calorific value of coal, which has high economic benefits. Carbonization drying equipment is required, no steam is required, investment is saved, and floor space is reduced. At the same time, it can effectively use cheap pulverized coal for manufacturers to replace high-priced coal, thereby reducing production costs and improving economic benefits.
The coal rod machine adopts a hard tooth surface reducer, which is small in size and high in bearing capacity. The impeller inside the coal rod extruder is designed with thickened blades, the impeller and the inner lining plate of the cylinder are made of wear-resistant precision casting materials, and the service life is 4-5 times longer than that of ordinary materials; the coal rod outlet at the head of the machine is replaceable. Made of wear-resistant alloy steel, easy to replace. The machine head and the barrel are in the form of articulation, which can be opened during maintenance, and it is very convenient to replace the internal impeller and barrel lining.
