The horizontal charcoal furnace is a new kind of air flow type carbonization stove, which can also be called charcoal kiln, charcoal making machine, charcoal stove. It is used to make charcoal from wood and all kinds of biomass.
Apply for many kinds of biomass raw materials, such as wood, wood log, tree branch, wood stick, wood waste, wood briquette, coconut shell, bamboo, olive husk, palm kernel shell, cashew nut shell, etc.
Easy to operate, safety, environmental protection and high production efficiency. It is the main ideal equipment of the charcoal production line.
1. The horizontal carbonization furnace adopts a horizontal machining process. The carbonization furnace workers have 30% structure, and there are lightweight high-temperature insulation materials in the middle of the interlayer, which can always maintain the temperature in the furnace without dissipating
2. The furnace door is sealed with high temperature rock wool than the boiler casing, and no air will enter, and the coal output rate is higher than that of the traditional carbonization furnace
a lot of
3. The reason why it is called environmentally friendly carbonization furnace is that the wood rods will produce a lot of light yellow combustible gas during the carbonization process. These gases can divert the combustible gas into the combustion zone of the carbonization furnace through the tubes from the carbonization furnace itself for secondary ignition and heating. Environmentally friendly and fuel efficient
4. The excess gas from the horizontal carbonization furnace can be used to dry the sawdust or burn the boiler.
5. The cooling time is shorter at the end of the carbonization furnace, and the space between the interlayers is used to cool the carbonization furnace with water, which is faster and more convenient.
6. The environmentally friendly air flow carbonization furnace is equipped with furnace tracks and trolleys, which are more convenient to use and reduce the labor intensity of workers. Charging and discharging, and the cooling time is long, the output of the carbonization furnace can be greatly improved
Charcoal carbonization furnace is industrial charcoal that uses agricultural and forestry residues (waste of agricultural and forestry products) as raw materials, and is formed by mechanical extrusion and decarbonization. It has the advantages of long burning time, strong firepower, smokeless, odorless, and no popping phenomenon during the burning process.
The new environmentally friendly horizontal carbonization furnace adds a flue gas recovery device on the basis of the original carbonization furnace. After the flue gas is recovered, it can be dust and smoke free. The recovered flue gas can be ignited as liquefied gas for heating, cooking and baking using the dry machine. At present, there are three types of carbonization furnaces, the common type (it can only be used to produce charcoal, not to collect gas); Wood carbonization equipment (used for carbonization of branches, wood blocks, coconut shell blocks, scrap pieces in furniture factories, the equipment can be configured The recovered gas can be converted by the gasifier furnace device into fuel gas for special carbonization furnace use or other); The new environmentally friendly carbonization furnace has one machine function and two purposes, and the materials can be directly carbonized, or carbonized after the bars are made.
