Biomass briquette machine is automatic equipment that compresses various dry powder materials into required equipment.According to the purpose, it can be divided into wood pellets, fodder pellets, straw pellets, rice husk pellets, activated carbon pellets, and organic fertilizer pellets. Zhongxiang's 3rd Generation High Efficiency Ring Die Granulator is an improved model of 3rd generation ring die based on years of experience and absorption of domestic and foreign advanced technology.This generation model replaces the previous belt-driven model with higher efficiency and better structure. Stablize.
Due to the uniform size of feed particles and comprehensive feeding, feed pellet making machine can ensure the recall and the full price of the ration, avoiding livestock and poultry from selecting the feed according to the palatability, and at the same time reducing the waste generated by flying dust in the air and water.
Feature 3: There are special feed pellet machines or briquettes for different livestock.
Now for divided feeding, there can be different machines or molds for pellet feeding. For example, fish farmers can use fish feed machines, those who live in pigs can use pig feed pellet machines, and those who keep sheep can use sheep feed machines. Others include small fish feed pellet machines, aqua feed pellet machines, extruded feed pellet machines, soft feed pellet machines, feed pellet mills and other feed processing machines.
Before the first use, special materials for grinding and lubrication shall be prepared according to the proportion of 10 jin of saw foam or bran, 3 jin of fine sand and2 jin of oil (how much depends on the size of the machine). lt is ok to hold them in groups and make appropriate amount of grinding materials. Screw in the pressure wheel bolt, do not press it once, adjust it evenly, make each pressure wheel rotate evenly (do not press it too tight), adjust it to the condition that the pressure wheel is slightly tight that is to say, the pressure wheel and the grinding plate have been adjusted in place tighten and fix the nut of the pressure bolt above the pressure wheel axle, ensure that the bolt will not loosen automatically in the work, start granulating, and slowly average Add Abrasives evenly, add the rolled abrasives to the machine again, and repeat the circulation for 1 to 2 hours. In the meantime, add a proper amount of edible oil or engine oil to the abrasives to make the surface of the small hole of the mould pressing plate smooth. Then add the required materials and start granulating. Before feed processing spray water and mix the raw materials for more than two hours to ensure that the moisture content is between 10% and 20% (different moisture content of raw materials also different), and the moisture content of materials with more refined fiber and starch is lower, while the moisture content of materials with more refined fiber and starch is higher. Because the granulator has the function of drying and maturing, the moisture in the raw materials will be dried and evaporated into 70-80% in the process of pressing by the granulator The pressed granular material can be bagged in 5-15 minutes after being dried in the shade under normal temperature.Different materials require different moisture content. Users can sum up the correct moisture content according to their own materials.If the moisture content is too low, it is easy to produce powder but not particles. If the moisture content is high,the particles produced are easy to be soft.
