info@cnzxme.com    +8613849073582
enLanguage
Cont

Have any Questions?

+8613849073582

May 30, 2022

The Grain Dryer Can Be Divided Into Electric Heating And Fuel Heating

The drum dryer can use coal, rice husk or straw as fuel, and convert it into clean hot air 

through combustion and heat exchange, which does not pollute the dried grain. You can also use electricity and gas as a heating source

In addition, it can also be equipped with automatic online temperature and humidity measurement devices,

The grain is dried thoroughly and evenly, and the dried grain can be directly stored in the warehouse.

The food quality after baking is good and pollution-free.

The fuel flows in the equipment without power, the operation is simple, and the floor space is small. The material passes through the diversified drying zone to achieve continuous, gentle and uniform heat and humidity exchange. With automatic control, the residence time of materials in the tower can be adjusted at will. Through the air flow control and the movement of the processed product, the processed product can achieve uniform and thorough drying. The tower dryer is most suitable for slow and uniform drying.

The material feed into the drum from the hopper before the machine is started, and then turn clockwise the switch, the machine rotates clockwise to dry, after about 20-30 minutes(depends on the humidity of material), turn counterclockwise the switch and the machine rotates counterclockwise to discharge the material(Refer to the videos)and automatic separation, cleaning the dryer is very convenient and thorough , and will not be leave any residual seeds, especially suitable for drying grain seeds

grain dryer

During the drying process of materials, there are hot air flow and radiant heat energy. Hot air drying means that the hot air flow moves forward from the tail to fully contact the material. Through heat conduction, the radiant heat energy is fully utilized, and the heat energy is fully transferred to the material to make the material The water in the cylinder is continuously evaporated, and the air-inducing device at the discharge port draws out a large amount of water and humidity to prevent secondary pollution caused by dust discharge.


Send Inquiry