Rice husk,straw,sunflower seed shell,peanut shell and other melon shell; Branches,trunks,bark,bamboo,and other wood scrap;All
kinds of crop straw,rubber,cement,gray Slag and other chemical raw materials,etc.
When working, the original powder material falls perpendicular to the surface of the rack from the feeding port of the biomass briquette machine. After the rotation of the rack, the material is continuously distributed uniformly on the surface of the mold cavity under the action of centrifugal force (the contact height of the pressure wheel and the mold), the crushed materials pass through the holes of the mold (the holes evenly distributed on the inner surface of the mold) under the rolling of the pressure wheel. In this process, the material is compressed to bring about physical changes, forcing the crushed material to form a continuously elongated cylindrical solid body. And this cylindrical rigid body is continuously extended until it is cut by the cutters evenly distributed around the die to form a certain specification Particle: the particles scattered around the biomass briquette machine die are concentrated in the discharging port by the moving teeth, and the particles automatically fall under the action of gravity, at which point the particle compaction process is completed.
The small livestock and sheep feed pellet machine does not need to add water during the pelleting process, does not need to be dried, and can add many additives and medicines, and the feed loss is very little. After the natural temperature is raised to about 70 degrees, the starch can be turned into gelatin, the granules ripen deeply, the surface is smooth, the hardness is high, and it can be stored for a long time.
Double Vertical Ring Die biomass briquette plant is currently a new type of wood pellet machine in China, which is developed and manufactured on the basis of the original vertical ring die pellet machine. This structure wood pellet machine adopts a large-modulus hard-tooth surface helical gear reducer, the main shaft is strengthened, the power output is strong, the equipment is stable, the failure rate is lower, and the production cost is lower. Now it has become the mainstream model of the biomass pellet machine industry, a new type of wood pellet machine, a new type of biomass pellet machine, and a new type of straw pellet machine.
The feed pellet machine is based on the principle of circular motion. The mold and pressure roller are made of high-quality alloy steel after special treatment. The main shaft and flat die drive the pressure roller to rotate under the action of friction. The material is gelatinized at a high temperature between the pressure roller and the mold, and the protein is solidified, and the denaturation is discharged from the hole of the mold under the pressure of the pressure roller to make the so-called pellets.
