The high-pressure sponge iron briquetting machine is mainly used for pressing powdery materials that are difficult to form.
Such:Precipitator dust, iron concentrate, raw material powder, manganese ore fines, coal powder, charcoal powder, metallic powder, iron scale, iron sludge, slime peat, fireproof material, desulfurized gypsum and dolomite,etc
Strict precautions in the actual operation of sponge iron briquetting machine:
1. Hard objects such as iron blocks and stones are strictly prohibited from entering the machine, and the resulting damage shall be borne by the customer.
2. The particle size of the material to be processed should be guaranteed to be less than 3 mm, otherwise it will affect the molding and reduce the service life of the machine.
3. It is strictly forbidden to start with heavy loads, and it is strictly forbidden for non-technical personnel to dismantle and adjust equipment indiscriminately.
4. Regular maintenance, observe whether the reducer and bearing seat are short of oil.
Sponge iron briquetting machine of the main motor is transmitted to the reducer through the V-belt: the reducer is transmitted to the drive shaft through the coupling, and then by a pair of open gears to ensure the cylinder shaft synchronization (the same speed is opposite) The driven cylinder is driven by a piston on top of the hydraulic cylinder (iron-supported fixed pressure type oblique), the pressure of the system is ensured by the hydraulic circuit, the hydraulic control valve and the accumulator.
The materials enter into the hopper of the forming machine evenly from the storage box through the quantitative equipment, and pass through the adjusting gate on the hopper, adjust to make the material enter uniformly into the middle of the pair of rollers.
The material briquetting unit is compressed from small to large. The forming pressure at the middle line of the pair of rollers reaches a large value. After the material passes through the line, the pressure decreases rapidly so that the material enters into the ball state and exits the ball smoothly.
The main wearing parts of sponge iron briquetting machine:
1. Rolling bearing; 2. Roll, auxiliary roll; 3. Feed nozzle; 4. V-belt.
Remarks: The equipment can be adapted to work continuously under harsh conditions, but customers are requested to operate in strict accordance with the delivery instructions.
Q: Do your products have certifications?
Q: How is the machine packaged when shipped?
Q: How long is the delivery time?
Q: How about the payment items?
Q: Which country have you exported to?
Q: How is your production capacity?
Q: Can we visit your factory?
Q: How to connect with you?
Hot Tags: sponge iron briquetting machine, China sponge iron briquetting machine manufacturers, food pellet machine, horizontal mixer machine, wood chip pellet machine, electric drum mixer, plastic mixer machine, small fish feed making machine
