The continuous carbonization furnace consists of a gasification furnace, a flue gas purification system, a carbonization furnace, and a quenching machine. The materials are first burned through a gasification furnace to produce flue gas. After the flue gas purification system, wood tar smoke and other gases produced. After the impurities, the flue gas is transferred to the carbonization furnace for combustion. When a certain temperature is reached, the carbonization furnace adds the materials that need to be carbonized, and passes through the pipeline to make the materials burn in the carbonization furnace. The combustion of organic matter needs to meet three points: heat, oxygen, and organic matter, because the carbonization furnace is almost a closed place, and can not meet the demand for oxygen, so that the material does not burn into ash but only burns in coal at a high temperature of 800 degrees inside The continuous carbonization furnace after adjusting the speed of the inner transmission device of the carbonization furnace. After the flue gas from the burning materials is processed in the carbonization furnace by flue gas purification, it is returned to the carbonization furnace for combustion, so that the heat energy of the machine can be continuously run, achieving smokeless, environmentally friendly and lasting effect. After the coal is transferred through the radiator, the temperature drops, so that the temperature of the coal is only 50-80 degrees.There may be sparks in the inner core of the material, which may ignite spontaneously. It is necessary to install carbon cooling mist spray equipment twice to completely eliminate the ignition source.
Continuous carbonization furnace equipment is used for peanut shells, sawn wood, corn stalks, bagasse, tree branches, rice husks, bamboo sawdust, sorghum stalks, sunflower husks, distillation kernels, corn cobs, sorghum stalks, coconut husks, And coffee grounds, cotton stalks, bean stalks, yam grass, dead leaves and other waste as raw materials, after high temperature to make high-quality and environmentally friendly automatic charcoal or charcoal powder. The carbonization material produced by the carbonization furnace is clean, high thermal energy, good market sales and broad prospects.
The charcoal carbonization furnace for lifting can be used for peanut shells, sawn wood, corn stalks, bagasse, branches, rice husks, bamboo shavings, sorghum stalks, sunflower husks, distillation kernels, sorghum stalks, sorghum stalks, coconut husks, pavers Coffee, cotton stalks The bean stalks, yam grass, dead leaves and other waste are used as raw materials to produce high-quality and environmentally friendly charcoal or powder after high temperature.
Charcoal carbonization furnace is industrial charcoal that uses agricultural and forestry residues (waste of agricultural and forestry products) as raw materials, and is formed by mechanical extrusion and decarbonization. It has the advantages of long burning time, strong firepower, smokeless, odorless, and no popping phenomenon during the burning process.
1.Open the charcoal carbonization furnace body cover.
2.Lift the oven bag and place it in the coal charging area.
3.Open the oven liner cover, put the oven liner on the tilt, and install the rod.
4.After the installation of the rails is completed, cover the furnace cover and lift the furnace bag into the furnace body.
5.Open the three fume ports of the furnace body in turn, close the furnace lid tightly, and spread some surface sand around the furnace lid to close, and start the carbonization.
