The charcoal machine equipment can crush sawdust, branches, rice husks, bamboo chips, peanut shells, sunflower seed husks, furfural residues, wine dregs, bagasse, corn cob, coconut shells, coffee grounds, and crop straws in the north and south. The machine-made carbon semi-finished products are produced from the high temperature and high pressure plasticizing machine as the raw material.
The charcoal machine is an important host in the machine-made charcoal production process.It is responsible for extruding the sawdust-like biological waste into a biological core rod with a diameter of about 50mm in preparation for further carbonization. It can be said that the charcoal machine is the key to the success or failure of the whole enterprise, so the process of choosing a stick making machine must understand its working principle and the advantages and disadvantages of the equipment.
The charcoal machine production line include:
Crusher: The raw materials are crushed into granules within 10mm by wood crusher.
Drying machine: it can automatically discharge the material and dry it again, the exhaust port does not cross the material, and the discharging port does not spray the material to fall naturally.It can be produced by four bar machines.
Sawdust briquette making machine: The density can be adjusted at any time. This technology not only guarantees the quality of products. Branches, leaves, sawdust and other agricultural raw materials are crushed, pressed and condensed, and because they can replace traditional charcoal, it is called "straw charcoal".
Carbonization Furnace: The fuel rods are carbonized and shaped from the rod making machine.
From raw material source to fuel use, the process is: material recovery → crushing → drying → automatic demineralization of feeding → billet making → carbonization → ejection → cooling → conveying → civil and small boilers → biomass power plant.
