Coarse crushing - jaw crusher. The jaw crusher is suitable for coarse crushing of various ores. If small stones and stones need to be processed, a fine crusher is also required. The processed finished products have uniform particle size, high three-dimensional product content, and high sales of finished products, which can meet high standards in the construction field.
Be sure to pay attention to the coal unloading of the scraper conveyor during operation, and do not pull large pieces of gangue, I-beam and other debris into the crusher to prevent the crusher from being jammed and damaged. When dealing with the above-mentioned debris, be sure to stop the machine before proceeding.
If the transfer machine is shut down, stop the crusher immediately. Before starting the transfer machine, the crusher should be started to avoid overloading.
Pay attention to the sound of the crusher at any time. If there is an abnormal situation, immediately send a stop signal to the driver of the brick-mounted aircraft, and stop the machine in time to deal with the power failure and lockout.
When we install the crusher for the first time, wiring is a very important link, because when the crusher leaves the factory, there are usually only lead cables, and the user needs to connect another cable when installing, so pay attention to whether the method is correct when connecting the cable. , Otherwise it will have a great impact on its use. Let's take a look at the cable wiring method of the crusher:
The crusher should be locked when handling large pieces of coal, gangue and rock on the transfer machine.
Ensure that the various protection facilities of the crusher are intact. Do not use the crusher that is damaged by the spray device and the dust curtain at the entrance and exit.
