There are many types of crushers, and the common ones are as follows:
1. Coarse crushing - jaw crusher. The jaw crusher is suitable for coarse crushing of various ores. If small stones and stones need to be processed, a fine crusher is also required. The processed finished products have uniform particle size, high three-dimensional product content, and high sales of finished products, which can meet high standards in the construction field. material requirements.
2. Fine crushing (medium and soft materials) - impact crusher. It adopts new manufacturing technology and special structural design. The finished product is cubic, without tension and cracks, and the grain shape is quite good. Stone (limestone, limestone, concrete, etc.), especially good at processing ore with low toughness and high brittleness, and the finished product has uniform edges and corners. It is a commonly used secondary crushing equipment.
3. Fine crushing (hard materials) - cone crusher. Cone crusher is a commonly used secondary crushing equipment in the field of sand and gravel. It is good at crushing high-hardness ores, with good wear resistance and low operating costs. As a relatively classic stone crusher, cone crusher appeared earlier in China, and now it has very mature technology and technology. In order to meet the processing needs of different users, cone crusher has been extended to full hydraulic type, compound type, multi-cylinder hydraulic pressure , single-cylinder hydraulic and other models and specifications
4. One crushing and one forming - hammer crusher. Hammer crusher is referred to as hammer crusher. It has large crushing ratio, convenient operation, adaptable to various types of materials and strong crushing force. It occupies a large proportion in the field of crushing equipment. Suitable for crushing medium and soft materials.
5. Walking crushing production line - mobile crushing. The mobile crusher is an optimized design that integrates various functions such as feeding, conveying, screening, crushing, etc., and realizes the functions of a complete production line. It can carry out multiple joint operations, and does not require infrastructure construction. After entering the site, the stretching equipment can be directly put into production to improve production efficiency; the whole set of equipment is fixed on the ship-shaped steel frame structure, and can be divided into tire type and crawler according to the way of movement. It can be moved under the traction of the front of the car, or it can move on its own, easily and freely on the production site, saving the time of equipment installation and the cost of transporting materials back and forth, shortening the preparation time of the production line, and opening a new way of mobile operation.
