The carbonization furnace belongs to the carbonization production industry, it is a new type of carbonization equipment with fast carbonization, no smoke or small smoke, low pollution, fast carbonization and high production efficiency.
1. It can equipped with Guide rail and loading basket. They are uniquely equipped for the horizontal carbonizing machine. Workers can load the wood or briquettes into the steel basket and then push it into the carbonizing chamber. This design saves the labor cost a lot and makes the operation easier.
2. Various heating methods. The heating source can be firewood, coal, natural gas, liquefied gas, burner, electric, etc.
3. The door of the furnace is sealed with graphite packing. This can prevent the air from entering the furnace and increase the charcoal yield.
4. Green and energy saving. The purifier tank can clean the smoke generated in the carbonizing. The cleaned gas enters the burning chamber through the pipes and then is ignited to heating the furnace. In this process, no harmful gas is emitted and reduces the consumption of wood, coal, LPG, etc for heating.
How to make charcoal from sawdust?
1. Wood crusher: A crusher will help you to reduce the size of your raw material to less than 5 mm.
2. Dryer: For small capacity drying, you can choose the air flow dryer with small investment. If your capacity is bigger, a rotary dryer will be a better choice.
3. Wood briquette machine: Press raw material into wood briquettes.
4. Charcoal furnace: After carbonization, wood sawdust briquettes become smokeless charcoal.
5. Other accessories: Conveyor, material distributor, etc.
Carbonize time more shorter: This type have three inner stove, when one inner stove finished (6- 8hours ) , use the hoist tools lift the inner stove out let it cooled naturally, at the same time, lift the other one in , 3 inner stove can work continuously. 24 hours can carbonizing 3-4 inner stove.
Shape and structure: The equipment is a horizontal cylinder, consisting of five main parts:the main furnace, the carbonization tank, the fume recovery pipeline, the fume purificationtreatment system, and the carbon charging equipment.
Three layers structure of the furnace body. The inner layer is high heat transfer and wear-resistance steel for increasing the carbonizing temperature. The middle layer is the asbestos for insulation. The outer layer is painted steel.
