Mechanical equipment has a use time, but this use time is also affected by human factors. The same is true for the crusher. We must pay attention to timely repair and maintenance during work. Below we briefly introduce the current situation of crusher equipment from three aspects.
1. The bearing is a part of the crusher that wears quickly. It may be that the grease is not enough, then an appropriate amount of grease needs to be added; if the bearing is damaged, the bearing needs to be replaced.
2. When replacing gasoline or kerosene, the amount of lubricant in the bearing housing must be changed every three months, and the bearing raceway must be cleaned carefully. The shaft plate is in contact with the surface of the shaft plate and must be filled with oil before moving.
3. Regularly check the crusher accessories. A broken chin must be part of the stone production line. Regularly adjust the tightness of the conveyor belt to ensure that the machine's bearing force in the conveyor belt is even.
Expansion of small information: At present, several crusher accessories are mainly needed in the market.
1. The main accessory jaw used on the jaw crusher: it is mainly made of high manganese steel. It has good hardness and strong resistance.
2. High manganese steel rolling mortar wall: It is the traditional material of cone crusher rolling mortar wall, it has good toughness and good deformation and hardening ability.
In order to keep the crusher in good working condition, reduce the incidence of failures, improve the efficiency of the equipment, and extend the use time, we must do a good job in the daily maintenance of the crusher, and pay attention to the lubrication of the crusher equipment. Maintenance and bearing maintenance to prevent the "strike" of the crusher.
