The use of the crusher is mainly for the purpose of crushing various stone materials, and the appearance of dust must be inseparable in this process. The dust problem will not only cause certain pollution to the surrounding environment, but more importantly, it will have a great impact on the health of the operators. Therefore, measures to prevent the emergence of dust must be done well. Let's take a look at the methods together:
1. Improving the unreasonable production process that caused the crusher to raise dust repeatedly, eliminating serious pollution production equipment, applying new technology and new equipment, simplifying the operation of crushing and screening, reducing the source of dust, that is, solving from the source. The updated equipment can not only reduce material scattering and dust, but also make the configuration of each operation more flexible.
2. According to the dust production characteristics of the crusher, the two dust sources of loading and unloading are firstly sealed, and then the dust is drawn out with a fan, and the dust-containing air is purified with a wet filter dust collector. The wet crushing and screening process is a very effective method for reducing dust pollution in crushing and screening plants. The wet crushing and screening process should be applied as much as possible under the conditions of the production process, so that the dust can be effectively controlled. The ground is scattered, and it also plays a protective role for the environment.
3. Reduce the height difference and inclination angle of the unloading logistics, set up isolation facilities as much as possible, and reduce the flow rate of the material under the premise of ensuring the smooth flow of the material, so as to reduce the flying of dust.
The three methods explained by the editor above can effectively prevent the appearance of dust. Everyone must pay attention to this problem when using the crusher to work. You can start with the equipment itself. When purchasing the equipment, it is recommended to choose a crusher with dust removal equipment, so that the effect of mutual cooperation is better. Of course, different levels of dust problems must be restricted by different methods, and operations must be carried out according to their actual conditions.
