Introduction
The animal feed mill is to extrude the mixed powdery feed at one time. It does not need to add water or dry it during the granulation process. After the natural temperature rises to about 70 degrees, the starch can be gelatinized, and the inside of the granules can be deeply matured.
The surface is smooth, the hardness is high, and it can be stored for a long time. It is an ideal equipment for raising rabbits, fish, chickens, pigs, sheep, cattle, and small and medium-sized feed processing plants.
Advantage
1. Wide adaptability of raw materials
About animal feed mill,The flat-die compression molding technology has a large die hole, and a large-diameter pressing roller is used to force the raw materials such as straw, rice husk, and wood chips with large volume and long fibers to be crushed and formed.
The requirements for the crushing of raw materials are not high. In addition, when this technology is used to compress fibrous materials, the moisture content of the raw materials can be compressed and molded at 13%-17%, and in most cases, the raw materials do not need to be dried.
2. Low power consumption
On the one hand, Animal Feed Mill, due to the large space of the flat die compression molding equipment and the large diameter of the pressure roller, need to compress and shape the raw material with a relatively large straw particle size, which overcomes the limitations of the ring die extrusion technology and screw extrusion technology in this regard and reduces the energy consumption of the material in the crushing link.
3. Long life of roller die
Due to the difference in working principle, the linear speed of the pressure roller of the flat die forming compression technology is lower than that of the ring die, so the roller die wears relatively slowly, and one side of the working surface can be turned over to use the other side after wear. Increased service life.
Precautions
1.When using, animal feed mill should be noted that there should be no hard foreign objects such as stones and iron blocks in the raw materials.
2. During granulation, it is strictly forbidden for the pressing spokes to contact the template and idling. The continuous feeding should not be too fast, not too slow, or interrupted. At the same time, lock the pressing roller nut to avoid loosening and damaging the main shaft keyway.
3. If there is no granulation and no material, the template should be removed, and after opening the holes one by one, add some fiber feed appropriately to restart the granulation.
4. The tightness of the screws in each part of the machine should be checked frequently. If there is oil leakage in the gearbox, the oil seal should be replaced in time, and the bearings in the machine head should be checked for lack of oil.
5. When the pellet machine is working, do not put your hand into the feeding port. If necessary, use a stick to help feed.
6. Before the machine is turned on, it is necessary to add less material first, and then turn it on. When the machine is turned off, a little feed should be left in the machine to prevent the machine press and the grinding disc from idling.
7. If the Animal Feed Mill is stuck during operation, it should be stopped immediately, and the pressing rod should be pressed until the bolts are loosened, and then the machine should be restarted.
8. After each work, the adjustment bolts must be loosened.
FAQ
1.Why is the pellet machine always blocked when it is used for the first time?
Smooth, directly made of raw materials, with high resistance and easy to block. When using abrasives repeatedly, grind the grinding disc first. The holes on the grinding disc are drilled one by one with a drill, and the hole wall is not smooth, so it is directly made of raw materials. The resistance is large, and it is easy to block. After repeatedly grinding through the grinding disc holes with abrasives, the ingredients can be made normally.
2.Does the pellet machine have any requirements for raw materials?
Grain can not be pulverized, but grass and straw must be pulverized before processing, because the particles made of powder are evenly nutritious.
Q: Do your products have certifications?
Q: How is the machine packaged when shipped?
Q: How long is the delivery time?
Q: How about the payment items?
Q: Which country have you exported to?
Q: How is your production capacity?
Q: Can we visit your factory?
Q: How to connect with you?
Why choose us?
- We take pride in producing Pellet Machine products of the highest quality at affordable prices.
- We continue to improve the reputation of our products and customer satisfaction, and our leading product quality and excellent service make us have a remarkable reputation and performance in the Animal Feed Mill industry.
- We offer Pellet Machine products that are suitable for a wide range of applications and industries.
- The best quality Animal Feed Mill, the most reasonable price and the most considerate service are the unanimous praise from our customers, and the satisfaction of our customers is the greatest return to us.
- We offer Pellet Machine products that are versatile enough to meet any application or industry.
- Our code of conduct is dedication, collaboration, passion and innovation.
- Our Pellet Machine products are backed by a team of experts who are invested in your satisfaction and success.
- The demand for our Animal Feed Mill continues to grow, and we near all efforts to meet the requirements of our customers.
- Our Pellet Machine products are designed with the end-user in mind for ease of use and durability.
- We always adhere to: reputation first, customer first, quality satisfaction, punctual delivery.
Hot Tags: animal feed mill, China animal feed mill manufacturers, Grass Chopper Machine For Animals Feed, Animal Feed Making Machine, Feed Processing Machine Product Line, Feed Pellet Machine Product Line, Animal Feed Pellet Making Machine, Animal Feed Mill
