Wood Charcoal Carbonization Furnace

Wood Charcoal Carbonization Furnace Parameter

Wood Charcoal Carbonization Furnace Introduction

wood charcoal carbonization furnace is a kind of wood charring equipment, mainly used for charring branches, wood blocks, coconut shell blocks, furniture factory trimmings blocks, etc. The equipment can be configured with gasifier device to recover gas into gas for charring furnace self-use or other.

Working Principle

The working principle of wood charcoal carbonization furnace is to burn the materials through the gasifier first, producing smoke. After the flue gas purification system takes into account the wood tar smoke and other gas impurities, the flue gas is transferred into the charring furnace. 

When it reaches a certain temperature, the charring furnace will add the materials to be charred, and after the transmission of the pipe, the materials will be charred in the charring furnace. 

When Wood Charcoal Carbonization Furnace reaches a certain temperature, the charring furnace adds the materials to be charred, and after the transmission of the pipe, the materials are burned in the charring furnace. 

Organic combustion needs to meet three points: heat, The amount of heat, oxygen and organic matter. Because the charring furnace is almost a closed space, it cannot meet the demand of oxygen. Because the charring furnace is almost a closed space, it can't meet the demand of oxygen, so that the material will not burn under the high temperature of 800 degrees inside the charring furnace after adjusting the internal transmission device of the charring furnace.

The material will not be burned into ash but only into charcoal after the adjustment of the speed of the conveying device inside the charring furnace. Burning in the charring furnace. After the flue gas from the material burned in the charring furnace is treated by flue gas purification, it returns to the charring furnace for combustion. 

After the smoke purification process, the carbonized material is returned to the charring furnace for combustion, so that the heat of the machine can run continuously to achieve the effect of smokeless, environmental protection and continuous.

Finally, the charcoal is conveyed through the cooling machine for cooling, so that the charcoal comes out with a temperature of only 50-80 degrees. In the process of conveying charcoal after coming out, because charcoal is fully in contact with air, if the material. If the material is dense and thick, although there is no open flame on the surface, there may be sparks in the inner core of the material.

There is also a possibility of spontaneous combustion. At this time, we need to install mist spraying equipment to cool down the charcoal for the second time, so as to completely eliminate the source of fire.

Raw Material

Tree branches, wood blocks, coconut shell blocks, trim blocks from furniture factories, rice husks, sawdust, bamboo ends, etc. 

Wood Charcoal Carbonization Furnace Product features

1.Low-temperature drainage high-temperature charcoal making.

The Wood Charcoal Carbonization Furnace is a horizontal manufacturing process, the charring furnace worker has a total of three into the structure, and the middle of the sandwich has a light insulation material, can always keep the temperature inside the furnace does not emit.

2. Sealed tightly low-temperature moisture discharge high-temperature charcoal making.

The door of the furnace is sealed with boiler packing, no air will enter, and the charring rate is much higher than that of conventional charring furnace.

3. fuel saving, low temperature moisture discharge, high temperature charcoal making.

The reason why it is called environmental protection charcoal furnace is because the wood sticks will produce a lot of yellowish combustible gas in the process of carbonization, these gases through the charcoal furnace itself with the pipe can let the combustible gas shunt to the charcoal furnace burning area to the second fire heating, plus environmental protection and save fuel.

4. multiple use methods Low-temperature moisture discharge high-temperature charcoal making.

The excess gas from the charring furnace can be used for drying sawdust or for boilers.

5. The cooling time is short, low temperature discharge high temperature charcoal making.

The cooling time of charring furnace is short, our charring furnace has 2 kinds of cooling methods, water cooling and air cooling, which is fast and convenient compared with natural cooling. The time is shortened from 8 hours to 4 hours.

6. Reduce labor intensity, low temperature dampness high temperature charcoal refining.

Environmentally friendly airflow charcoal furnace is equipped with a track and kiln car inside the furnace, and there is a flat car connected to the inside outside of the charcoal furnace. It is more convenient to use and reduce the labor intensity of workers.

FAQ

1.What is the output of the product ?

According to the specific charring furnace model. The parameter table above is for your reference.

2. What are the precautions when using the product?

Charring furnace in the initial ignition and midway out, be sure to open the side to close the fire door, to prevent too much combustible gas in the furnace, ignition, resulting in deflagration, causing harm to human safety.

Our service

We can tailor the Wood Charcoal Carbonization Furnace to ensure your actual benefits; we will provide regular return visit services after you purchase products; we will arrange delivery as soon as possible; help users optimize and maintain equipment.

Introduction of our company

Zhongxiang machinery company to integrity-based, quality shall prevail, adhere to the development of fine and specialized direction, the implementation of high-quality goods strategy, to create a distinctive brand, pay attention to personalized product design, continuous technological innovation, in order to meet the needs of customers to enhance the value; good service to the majority of customers at home and abroad.

Zhongxiang machinery with strong strength, advanced technology and excellent product quality to obtain the recognition of users in various industries, and in the fierce market competition to stand invincible. Zhongxiang Machinery will choose the suitable model for you according to your industry output requirements and serve you wholeheartedly.

Why choose us?

• Our Carbonization Stove products utilize the latest technology and materials for superior performance and long-lasting durability.
• With the help of our investors, we have been able to integrate our global resources to create a series of products with unique and exclusive advantages for the market.
• We are dedicated to providing high-quality Carbonization Stove products at reasonable prices.
• We strive to create products of different designs and specifications to meet the needs of different customers and markets.
• Our Carbonization Stove products are built to meet the unique needs of our customers.
• In the development process, we actively participate in social welfare undertakings and spare no effort to benefit the society.
• We provide cost-effective Carbonization Stove products that meet the highest standards of safety and quality.
• "Efforts, let us win-win" is the company's eternal cooperation concept; "customer-centric, strive to make customers satisfied" is the goal of the company's unremitting pursuit.
• Our Carbonization Stove products are built to last and are designed for maximum efficiency.
• With an international vision and global service capabilities, we strive to provide customers with cost-effective Wood Charcoal Carbonization Furnace products.

Hot Tags: wood charcoal carbonization furnace, China wood charcoal carbonization furnace manufacturers, manual dough kneading machine, fertilizer pellet making machine, homemade briquette press, underwater pelletizer, industrial mixer homogenizer, spiral mixer 5kg