BBQ Charcoal Briquette Making Machine Parameter：
BBQ Charcoal briquette making machine is mainly used for tailings treatment, pressing difficult-to-form powdery materials, which is characterized by high forming pressure, adjustable main machine rotation speed, and equipped with screw feeding device.
Through the belt, it is transmitted to the reducer, and the reducer is transmitted to the drive shaft through the coupling, and then through a pair of open gears, the two rollers are synchronized (constant speed reversal) and the storage bin enters the molding hopper evenly through the quantitative equipment, so that the material The unit forming pressure changes from small to large, and the forming pressure on the roller line reaches a large value.
After the material passes through the line, the BBQ Charcoal briquette making machine forming pressure decreases rapidly, making the material enter the ball-off state. Flatten the ball. For the comparison of easy materials, such as coke powder, oxide flakes, dust removal, coal slime, various metallurgical powders, sponge iron carbon products, etc., the effect is obvious and the effect is extraordinary. Mainly used for: coal powder molding; dry powder molding; desulfurization gypsum molding; coke molding; iron filings and various metal ore powder molding.
The ball pressing machine is advanced in technology, reliable in quality, multi-purpose, and strong in pressure. It is suitable for large, medium and small enterprises to establish a certain production line. It is suitable for forming industrial gas, boiler, cold pressed coke, ignition briquettes, civil briquettes, civil metallurgy, wear-resistant materials, medicine and other materials.
After years of industrial use and improvement, compared with other similar products, the briquette machine has obvious advantages such as high ball forming rate, low power consumption, compact structure, easy maintenance and debugging.
BBQ Charcoal briquette making machine that meets material forming requirements
1. The particle size of the material can be 90-260 mesh.
2. Metal is not allowed in the material. Otherwise, the drum surface will be damaged.
3. If the feeding is sufficient, an adjustable screw feeder should be used to observe the amount of returned material and adjust the supply of new material.
BBQ Charcoal briquette making machine workflow
The screw feeding device is driven by an electromagnetic speed-regulating motor, which is rotated by a pulley and a worm reducer, and the compressed material is forced into the main feeding port. Due to the constant torque characteristic of the electromagnetic speed regulating motor, when the pressing amount of the screw feeder is equal to the amount of material required by the main engine, a constant feeding pressure can be maintained to stabilize the particle quality.
If the feeding amount is too large, the feeding device will be electrically overloaded; if the feeding amount is too small, it will not be able to form balls. Therefore, proficient operation technology is an important condition for the normal operation of the ball pressing machine.
Q: Do your products have certifications?
Q: How is the machine packaged when shipped?
Q: How long is the delivery time?
Q: How about the payment items?
Q: Which country have you exported to?
Q: How is your production capacity?
Q: Can we visit your factory?
Q: How to connect with you?
Hot Tags: bbq charcoal briquette making machine, China bbq charcoal briquette making machine manufacturers, small grinder mixer, 150 feed pellet machine, Coke Powder Pressing Machine, fogger mixer grinder, electric motor for cement mixer, pellet mill equipment
